Konica Minolta KM 1024 MN 14PL
- Customer pickup,
- Courier
- In detail
This Konica KM 1024 printhead has wide-width featuring 72mm print width for realization of high productivity.
The unit is equipped with twice the number of nozzles mounted on the KM512 printhead, enabling the high density required to realize the 72mm print width. This increased width further enhances applicability to printing systems (e.g. Single-pass inkjet printers) that demand high productivity. Konica Minolta piezo on-demand inkjet heads are already driven using lower voltages than other inkjet heads and the new actuator used in the KM1024 reduces power consumption even further.
This makes the printhead ideally suited to “green” design and shows Konica Minolta’s ongoing consideration for the environment. Equipped with a new control IC, the KM1024 printhead can print up to a maximum of 8 drop sizes. This allows even greater control of the printed image resulting in smoother colour gradients and more precisely matched tones. This is the original Konica printhead and it carries the manufacturer warranty. This printhead is available in 14 (M) and 42 (L) picoliters. MN heads have no heater.
Used in
▶ Rimal 3304UV (05/06/07 / 08UV) Big Roll ▶ Maxima INNO ▶ Allwin K3204B / 05B / 06B / 07B
KM1024MN - logical and timely fast follower popular KM512MN to the conservation and / or development of the best properties - for example, all work in 1024 the head of variable size droplet mode (greyscale).
Despite the fact that the head is suitable for any type of ink, the model is installed mainly on the solvent printers because It has no built-heating required in UV ink printing. However, if the printer is provided in addition to the heating of heating ink head carriage, and such head can freely participate in the printing of UV ink. It depends on the technological features and capabilities of the printer (and still less simple and logical option, in terms of production - to establish the same head, but with an internal heating - KM1024MH).